Definitions of Switch Terms

There are following changeover timings and also this term occasionally means the sequence of each circuit of several circuits.

・Shorting
Switching action is accomplished after electrical connections have been made across the terminals during circuit changeover.

・Non-shorting
Electrical connections are turned off once across the terminals during circuit changeover.
The switches without indication of changeover timing are non-shorting ones.

・Not specified
The switches which changeover timing of shorting or non-shorting causes at random and the changeover timing can not be specified accordingly.

In case of micro current circuit, * C-* P represents number of circuits and contacts. (Example 1C-2P)
In case of power switches, the circuit and the contact of switch are occasionally represented by the symbol of P and T like SPST (Single Pole single Throw) but the symbol * C-* P is used in our catalog.

Maximum contact rating of applicable current and voltage.

・Sliding Contact
Sliding contacts removes an insulator on the contacts (a fixed contact and movable contact) by its mechanical friction between fixed contact and sliding movable contact and keeps the contacts clean, which is excellent for micro current use.

・Double-side Sliding Contact
Sliding contact with fixed contact holding movable contact at both side.

Switches with mechanical contacts have the phenomenon that occurs instantaneous on and off of contacts during changeover and also the same phenomenon during stationary position by the external factors (shock and vibration), which is so called “chattering and bouncing”
Special consideration for contact chattering and bounce shall be necessary when designing digital circuits and software.

Distance between fixed contact and movable contact and the effective travel of the contact for switching.
For the application of the door interlock switch of OA equipments, the required contact gap is specified by the safety standard.

The structure with kink-shaped frame terminals which keep the switch from coming off after insertion into the PC board or the structure with springy portion to catch the objects after insertion into the panel.